铝箔分卷机,Aluminum Foil Separator英语短句,例句大全

铝箔分卷机,Aluminum Foil Separator

1)Aluminum Foil Separator铝箔分卷机

1.This Paper Analyzes The Problems Inducing Quality Defects In Course Of Operating The Aluminum Foil Separator,Discusses The Relevant Methods For Improvement.针对国产铝箔分卷机在使用过程中存在的问题,分析导致产品质量出现缺陷的原因,就有关改进方法进行探讨。

2)Foil Separater铝箔分切机

1.Three Main Problems About Electrical Control System Of Foil Separater And Slitter Were Analysed.分析了铝箔分切机和铝箔剪切机电控系统设计中的三个主要问题：机列张力形成方式的选择，卷取张力控制方法的选择，卷径的测算。

3)Aluminum Foil Coil铝箔卷

英文短句/例句

1.Repeat Process To Make The Second Packet.按照以上方法重复制作另一个铝箔卷。

2.Aluminium Foil :Aluminium Sheet Or Coil Rolled To A Thickness Of Less Than 0.15mm.铝箔：轴压至小于0.15毫米厚的铝片或铝卷。

3.Study On Technology Of Radiator-Fin Made Of Foil Of Automobile Air Condition Produced By 3003 Aluminum Alloy Cast-Rolling Roll3003铝合金铸轧卷生产汽车空调散热器翅片用箔的工艺研究

4.Poly-Cello Laminated Paper Or Foil For Flexible Package.保丽纸及袋、铝箔袋

5.Hot Stamping FoilGB/T10456-1989电化铝烫印箔

6.Aluminium Foil For General PurposeGB3198-1996工业用纯铝箔

7.Note: The Hydrophilic Coating Base Material Is Executed By The Aluminium Foil Used For Air Conditions.说明：亲水涂层铝箔的基材按空调器用铝箔执行。

8.The Optifoil Concept-A Foil Minimill;最优化铝箔厂──建设新铝箔厂的最佳选择

9.Packing: Vacuum-Packed With Aluminum Foil. 1kg Per Package.包装：铝箔真空包装，1公斤/袋。

10.Wrapping Aluminium Foil Round A Joint Allows The Meat To Cook In Its Own Juice/Juices.用铝箔把肉包住使之在原汁中烹制.

11.Aluminium Foil For Power CapacitorsGB/T3616-1991电力电容器用铝箔

12.Aluminium Foil For Electrolytic CapacitorGB/T3615-1983电解电容器用铝箔

13.Measuring Thickness Of The Aluminium Foil--Weighing MethodGB/T6608-1986铝箔厚度的测定称量法

14.Manufacturing The High Temperature Resistance Of Print Ink耐高温药用铝箔包装印刷油墨的开发

15.Study On Microstructures And Mechanical Property Of Al0.2Mn0.3Fe Wing-Foil;Al0.2Mn0.3Fe翅片铝箔的组织和性能研究

16.Investigations On The Technical Processes And Cube Texture In Anode Aluminum Foil;阳极铝箔工艺过程和立方织构的研究

17.Preparation And Research Of New Nano-Sized Hydrophilic Aluminium Foil Materials;新型纳米亲水铝箔涂覆材料制备研究

18.Investigation On The Microstructure Of Sheets Of Hot Roll Aluminium Foils And Cast-Rolling Aluminium Foils For 1235;1235铸轧和热轧铝箔毛料组织研究

相关短句/例句

Foil Separater铝箔分切机

1.Three Main Problems About Electrical Control System Of Foil Separater And Slitter Were Analysed.分析了铝箔分切机和铝箔剪切机电控系统设计中的三个主要问题：机列张力形成方式的选择，卷取张力控制方法的选择，卷径的测算。

3)Aluminum Foil Coil铝箔卷

4)Aluminium Foil Mill铝箔轧机

1.The Fatigue Failure Of Working Roller In Aluminium Foil Mill Was Ana1ysed.对使用中的铝箔轧机工作辊产生疲劳破裂的因素进行了分析。

2.The Life Of Double-Column Angular Contact Thrust Ball Bearing Is Very Lower And It Was Easily Damaged Owing To Superheat On Operation Side Of The Work-Roll In 2350 High Speed Aluminium Foil Mill, Which Was Generated By Oversize Axial Force And Castastrophic Non-Axial Load.某公司２３５０高速铝箔轧机操作侧止推双列角接触球轴承寿命低、易烧熔，其原因是过大的轴向力及严重偏载。

5)Foil Mill铝箔轧机

1.The Influence Of Foil Mill Accuracy On Strip Flatness;铝箔轧机的精度对板带平直度的影响

6)Foil Rolling Mill铝箔轧机

1.In Practical Production,It Is Easy To Take Place The Fire And Equipment Accidents Due To Super Temperature Of Work Roll Bearings Box In Aluminum Cold Rolling Mill And Foil Rolling Mill.实际生产中铝带材冷轧机和铝箔轧机易于发生由于工作辊轴承箱温度过高而造成的火灾和设备事故。